如何防止寶馬汽車油泵損壞？

來源：http://www.philiprobert.com發布時間：2017-11-09 17:36:18

1.水會腐蝕油泵，所以含水的物質禁止使用油泵抽真空，請到1210房間使用水泵抽真空。
1. water will corrode the oil pump, so the water containing substances prohibit the use of oil pump vacuum, please go to room 1210 pumping vacuum.
2.含有大量溶劑的物質請首先在烘箱中除去大部分的溶劑后，再使用油泵抽真空。
2. materials containing a large amount of solvent, first remove most of the solvent in the oven, then use the oil pump vacuum.
3.按正確的順序使用真空泵，以防止倒吸現象發生。
3. vacuum pumps are used in the correct order to prevent reverse suction.
4.使用完真空烘箱后，務必做好清潔工作，擦干凈真空烘箱的玻璃窗。
4. after using the vacuum oven, be sure to do a good job cleaning, wipe the glass window of the vacuum oven.
5.擦凈表面防銹油。
5. clean surface rust proof oil.
6.清除調速器內腔、噴油泵內腔的防銹油，加入規定牌號的潤滑油。
6. remove the rust proof oil in the inner cavity of the governor and the inner cavity of the injection pump, and add the lubricating oil of the specified grade.

7.燃油管路里的防銹油也應在使用前清除，將燃油接入噴油泵管路，不斷地轉動噴油泵凸輪軸，直至出油閥緊座噴出潔凈的燃為止。
7. the antirust oil in the fuel pipeline should be removed before use. The fuel will be connected to the injection pump pipeline, and the camshaft of the fuel injection pump will be continuously rotated until the outlet valve seat is ejected.
8.燃油選用合理。
8. reasonable fuel selection.
9.必須使用標號合適的燃油。一般夏天使用0號柴油，冬季使用-10號輕柴油。
9. must use marked fuel. Generally use 0 diesel in summer, and use -10 light diesel oil in winter.
10.使用的燃油必須干凈，不得含有任何雜質和水分。
10. the fuel must be clean and must not contain any impurities and moisture.